Mould Damage Remediation in Burton, NB

When a home suffers a water damage event, a mould infestation can quickly arise and spread throughout a home in 48-72 hours. Because mould can produce allergens and irritants, you will want a professional that has training and experience to properly resolve the mould infestation. If you suspect that your Burton home or business has a mould problem, SERVPRO of Fredericton can inspect, assess and remediate your property.

Learn more about mould and what to do until help arrives by reviewing these mould damage tips.

SERVPRO of Fredericton

If You See Signs of Mould, Call Us Today – (506) 451-9000

Understanding Mold

Confusion and misunderstanding surround the topic of mould and mould remediation. Some restoration businesses even make claims to remove all mould from a building. This is a fallacy. Mould spores occur naturally almost everywhere, both indoors and outdoors. These microscopic spores float along in the air and can enter a home or business through windows and HVAC systems. Consider these facts:

  • Mould is present almost everywhere, indoors and outdoors.
  • Mould spores are microscopic and float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or on a pet.
  • Mould spores thrive on moisture. Mould spores can quickly grow into colonies when exposed to water. These colonies may produce allergens, irritants, and toxins. 
  • Before mould remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mould may return. 
  • Mould often produces a strong, musty odor and can lead you to possible mould problem areas.
  • Even higher-than-normal indoor humidity can support mould growth. Keep indoor humidity below 45 percent.

Faster to Any Size Emergency

In as little as 48 hours, a minor mould issue can quickly spread through a home or business. Once you contact us, we’re dedicated to starting the remediation process quickly. This fast response lessens the mould damage, limits additional damage, and reduces the remediation cost.

Locally Owned, with National Resources

SERVPRO of Fredericton is locally owned and operated, so we are part of the Burton community too. When you have a water or mould damage issue, we’re already nearby and ready to help. We’re also part of a network of over 1,700, including special Disaster Recovery Teams placed strategically throughout the country to respond to large-scale fire, water, and storm disasters.

We are proud to serve our local communities:

Highly Trained Water and Mould Restoration Specialists

We are trained mould damage specialists who get started quickly to get your home or business back to normal, with specific training and certifications to handle your restoration needs. Learn about our water and mould training and certificates.

The Mould Remediation Process

Every mould damage scenario is different and requires a unique solution, but the general mould remediation process stays the same. The steps listed below illustrate our “typical” process:

Step 1: Emergency Contact - (506) 451-9000

The mould cleanup and restoration process begins when you call us. Our representative will ask a series of questions to help us determine the necessary equipment, resources, and personnel.

Step 2: Inspection and Mould Damage Assessment

We determine the scope of the mold damage by carefully inspecting your property for visible signs of mould. Since mold can be hidden, we use various technologies to detect mould and hidden water sources. 

Step 3: Mould Containment

Our professionals use various containment procedures to prevent the spread of mould. We may use advanced containment procedures like negative air chambers to isolate the contaminated area with physical barriers and negative air pressure to keep the mould spores from spreading during the cleanup process. All fans and heating and cooling systems will be turned off to prevent the spread of mould.

Step 4: Air Filtration

We use powerful air scrubbers, HEPA vacuums, and other filtration equipment to remove microscopic mould spores out of the air. This air filtration process and our mold containment process help to prevent the spread of these mould spores while the mould remediation is in process.

Step 5: Removing Mould and Mould-Infested Materials

Depending on the amount of mould growth and the types of surfaces involved, the mould remediation process can vary significantly. In general, we’ll use antifungal and antimicrobial treatments to eliminate mould colonies and to help prevent new colonies from forming. Depending on the severity of the infestation, we may need to remove drywall, carpeting, and other porous materials.

Step 6: Cleaning Contents and Sanitizing

SERVPRO of Fredericton will use a variety of cleaning techniques and products to clean your furnishings and personal belongings. Since mould infestations also cause a persistent musty odor, our professionals are also trained to remove odours and provide deodourisation using fogging equipment.

Step 7: Restoration

During the remediation process, it’s often necessary to remove porous building materials like subfloors, drywall, and carpet. The restoration step returns your Burton, NB home or business back to normal. Depending on the severity of mould damage, the restoration step may involve minor repairs, such as replacing drywall, or it may involve a substantial reconstruction project.

SERVPRO knows Mould

In Burton, NB, SERVPRO of Fredericton is ready to tackle and resolve any mould issues that arise. SERVPRO professionals understand the anxiety that can happen when a homeowner uncovers mould. Let us help put your worries to rest. Our knowledgeable crew is ready with the gear needed to tackle any mould job. Reach us at (506) 451-9000 - We’re ready to activate our team to remediate your mould.